Product introduction
Go back to the product introduction page.
Burner products
Direct flame type
Straight flame
Developed by Osaka Gas and manufactured by us
Name
Pilot burner  
Model

PLM・PLL

Flame type Straight flame
Product code PLL-5K PLL-10K PLL-20K
PLM-5K PLM-10K PLM-20K
Features Source mixing burner which can be used independently or as a pilot.
Use Burner for ignition (pilot burner)
Combustion amount
5.1kW~20Kw
Developed by Osaka Gas and manufactured by us
Name
Swirled short flame pilot burner  
Model PLS
Flame type Straight flame
Product code PLS-2K PLS-5K PLS-10K PLS-20K PLS-40K
Features The combustion range is wide compared to the source mixing burner with a flame retention structure. It is difficult to blow its strong flame off. It has an excellent ignition performance. Even if the air ratio changes and is increased, the burner recovers to produce its excellent flame when the air ratio returns to normal.
Use Burner for ignition (pilot burner)
Combustion amount
2.0kW~41Kw

Name
Pilot burner Catalog
Model NPU
Flame type Straight flame
Product code NPU-20/15A NPU-20/20A
Features It is a source mixing burner which can be used independently or as a pilot. The burner body is made of aluminum alloy and so is lightweight. The burner top length can be specified freely.
Use Burner for ignition (pilot burner)
Combustion amount
5.2kW~11kW
Developed by Osaka Gas and manufactured by us
Name
High Temp Burner  
Model HT
Flame type Straight flame
Product code HT-50K HT-100K HT-200K HT-500K
Features It can be used in ranges from low temperature to 1400°C. Stable combustion can be achieved over a wide range of air ratios. The working gas pressure is low and appliances such as a booster machine are not necessary. The turn-down ratio is high.
Use Forging and heating of steel, heating of steel and copper alloy, hardening and tempering of steel, porcelain firing Enamel firing, non-ferrous metal pot furnaces, and other general heating furnaces
Combustion amount
52kW~525kW
Developed by Osaka Gas and manufactured by us
Name
HAM burner  
Model HAM
Flame type Straight flame
Product code HAM-50K HAM-100K HAM-200K
HAM-100KR HAM-200KR
Features It can be applied to various industrial furnaces from low to high temperature ranges. Tempered air up to 400°C can be used. An excellent furnace air mixing effect can be obtained with a straight flame. It has a high turn-down ratio and can be used with a low pressure supply. High-speed bottleneck specifications are also available.
Use Heating furnace for casting, non-ferrous metal melting furnaces, and heat treatment furnaces
Combustion amount
52kW~210kW
Developed by Osaka Gas and manufactured by us
Name
LC burner Catalog
Model LC
Flame type Straight flame
Product code LC-20K-S LC-50K-S LC-100K-S LC200K-S
LC-400K-S LC-800K-S LC-1600K-S
LC-20K-L LC-50K-L LC-100K-L LC-200K-L
LC-400K-L LC-800K-L LC-1600K-L
Features It is a lightweight and compact burner since aluminum alloy is used for the burner body. It generates a short flame. The flame diameter is further reduced by narrowing the end of the heat chamber, and the flame length is also shortened. The flame diameter and length can be adjusted according to the features of the equipment (type S). The flame diameter is comparatively small and long (type L). For 20K to 800K, the main burner is ignited directly. Thus, pipes around the burner can be arranged easily. Preheated air up to 300°C is usable.
Use Heating furnaces, crucible type non-ferrous metal melting furnaces, pot type metal heat treatment furnaces, and ladle heating equipment
Combustion amount
21kW~1679kW


Name
Metallic jet burner  
Model MJ
Flame type Straight flame
Product code MJ-50K MJ-100K
Features Since a metal heat chamber is used, the burner is lightweight and compact. It can be installed at the desired angle. A direct ignition method is used.
Use Non-ferrous metal melting furnaces, drying furnaces, metal heat treatment furnaces, and other heating furnaces
Combustion amount
52kW~104kW

Name
Metallic burner Catalog
Model MJP
Flame type Straight flame
Product code MJP-20K MJP-50K MJP-100K
MJP-200K MJP-400K
Features Since a metal heat chamber is used, it is lightweight and compact, and can be installed at the desired angle. The combustion range is wide during low combustion and it can be used even when excess air is supplied. A direct ignition method is used.
Use Non-ferrous metal melting furnaces, drying furnaces, metal heat treatment furnaces, and other heating furnaces
Combustion amount
21kW~420kW

Name
High jet burner Catalog
Model HJ
Flame type Straight flame
Product code HJ-15K HJ-50K HJ-100K HJ-200K
Features The burner body is lightweight and compact. It can be used within ranges from low temperature to 1800°C. A direct ignition method is used.
Use Heating furnace for forging, non-ferrous metal melting furnaces, ceramic firing furnaces, metal heat treatment furnaces, and other heating furnaces
Combustion amount
15kW~207kW

Name
High jet burner
(H-L control specifications)
Catalog
Model HJP
Flame type Straight flame
Product code HJP-100K HJP-200K HJP-400K
Features The burner body is lightweight and compact. There are long flame specifications and short flame specifications, and they can be used for various purposes. A direct ignition method is used.
Use Heating furnace for forging, non-ferrous metal melting furnaces, drying furnaces, metal heat treatment furnaces, and other heating furnaces
Combustion amount
21kW~420kW

Name
High jet burner(with dilution air) Catalog
Model WHJ
Flame type Straight flame
Product code WHJ-50K WHJ-100K WHJ-200K
Features Dilution air can be introduced from another system based on our high jet burner. Heating and cooling of dilution air and gas combustion can be controlled easily. A direct ignition method is used.
Use Ceramic firing furnaces and other heating furnaces
Combustion amount
52kW~207kW
Developed by Osaka Gas and manufactured by us
Name
BF burner  
Model BF
Flame type Straight flame
Product code BF-200K BF-400K BF-800K
Features It is a compact burner which can generate a luminous flame equal to that produced by an oil burner by thermally decomposing natural gas.
Preheated air up to 450°C is usable.
Since a direct ignition method is used, the pipe arrangement is simple.
The turn-down ratio is high. (10:1)
Use Heating furnace for forging, metal melting furnaces, and heat treatment furnaces
Combustion amount
207kW~842kW
Developed by Osaka Gas and manufactured by us
Name
LC burner with fan  
Model LCF
Flame type Straight flame
Product code LCF-50K-L LCF-100K-L LCF200K-L
LCF-400K-L LCF-800K-L
LCF-50K-S LCF-100K-S LCF200K-S
LCF-400K-S LCF-800K-S
Features Since it is a package type of product, it can be set up easily at the site and is available for a low price. Both long flames and short flames can be selected from among 52 to 840 Kw, and various types of equipment and applications are supported.
Temperature can be controlled sensitively through its high turn-down ratio. Since the fan pressure is high, it can be used even in equipment that uses a positive furnace pressure.
Use Heating furnace for forging, non-ferrous metal melting furnaces, drying furnaces, metal heat treatment furnaces, and other heating furnaces
Combustion amount
52kW~840kW
Developed by Osaka Gas and manufactured by us
Name
MK burner  
Model MK
Flame type High-speed straight flame
Product code MK-80K MK-150K MK-300K MK-500K
Features The flow velocity of the combustion gas is 180 m/s, which is high speed.
It is lightweight since it uses a metal heat chamber.
The mixing effect in the furnace is increased by the high-speed exhaust stream.
The convection heating effect is increased by the high-speed exhaust stream.
Use Heat treatment furnaces, heating furnaces, galvanizing furnaces
Combustion amount
84kW~525kW
Developed by Osaka Gas and manufactured by us
Name
RO burner  
Model RO
Flame type High-speed straight flame
Product code RO-30K RO-50K RO-100K RO-200K
RO-400K RO-600K
Features It can be operated in air ratios ranging from 0.7 to 1.0.
The turn-down ratio is high. (5:1)
There is no need to worry about backfire and the safety level is high. A nozzle mixing method is basically used for the burner structure. The burner top contains a section for mixing combustion gas and air. The remaining oxygen concentration in the combustion gas becomes nearly zero by carefully mixing the gas. The amount of carbon precipitation is also small.
Use Heat generation atmosphere gas generators, non-metallic melting/holding furnaces
Copper bright annealing furnaces and others (scale furnaces etc.)
Combustion amount
31kW~629kW
Developed by Osaka Gas and manufactured by us
Name
Bunsen burner using gas pressure  
Model SBB
Flame type Straight flame
Product code SBB-20K SBB-50K SBB-150K
SBB-300K SBB-600K
Features Air is taken in from the primary air suction hole provided on the nozzle tip and burner body by means of gas pressure (98 Kpa as standard), mixed in the mixing tube, and blown out of it. Then, secondary air is taken in from the end of the heat chamber and burned. Since an air blower for combustion is unnecessary, the periphery of the burner is streamlined. The burner can be installed and removed easily and can also be easily operated (ignited and extinguished). The burner is simple and low cost. It is easy to maintain.
Use Non-ferrous metal heating, ladle and steep plate heating, heating of various molds
Combustion amount
20kW~635kW
Developed by Osaka Gas and manufactured by us
Name
Compressor air burner  
Model COM
Flame type Straight flame
Product code COM-20K COM-50K COM-150K
COM-300K COM-600K
Features The COM burner uses high-pressure air as part of the combustion air source and burns air in the atmosphere using that pressure. No combustion blower is needed. It can be easily operated (ignited and extinguished).
Use Non-ferrous metal heating, ladle and steep plate heating, heating of various molds
Combustion amount
20kW~635kW
Developed by Osaka Gas and manufactured by us
Name
Two-staged combustion burner for low Nox  
Model PAX
Flame type Straight flame
Product code PAX-200K PAX-400K
Features It has a structure which does not create a local high-temperature area in the flame by combining the two-staged combustion method and self- recirculation method. The low Nox level can be maintained even if the combustion air is preheated up to 300 to 400°C.
Use Heat treatment furnace, heating furnace
Combustion amount
210kW~420kW
Developed by Osaka Gas and manufactured by us
Name
Submerged combustion burner  
Model SM
Flame type Straight flame
Product code SM-150K SM-240K SM-350K SM-800K
Features A high heat efficiency can be obtained by direct vapor heat exchange. It has a fluid mixing effect through jet flow of the combustion gas. A baffle plate is used to prevent any whirling motion on the liquid surface, improve the efficiency, and realize a quiet combustion.
Use Liquid tank heating, condensation of chemical, waste liquid, bath, heated pool
Combustion amount
150kW~800kW
 
Name
Source mixing line burner  
Model ML
Flame type Line flame
Product code ML-3U.6U.9U12U.15U
Features It is made of cast iron, which is robust and durable.
Use Low-temperature heating equipment
Combustion amount
31KW~154KW
 
Name
NCL burner Catalog
Model NCL
Flame type Line flame
Product code NCL-4 NCL-6 NCL-8
Features This line burner uses a ceramic plate as the combustion plate. Since the turn-down ratio is high, uniform and stable combustion is available from radiant heating by surface burning to convection heating by a blue flame.
Use Band ovens, hot-air drying furnaces, fryers for industrial use
Combustion amount
14kW~27.9kW
 
Name
Induction burner  
Model CBI.CBX
Flame type Line flame
Product code CBI-7.5. CBX-15
Features Hot air from a direct flame can be generated by installing the burner in a ventilation duct. It is a unit type of air heating burner (can be coupled in units of 300 mm).
Use It is used for hot air generators.
No pilot burner is needed.
Combustion amount
CBI 87KW ・ CBX 174K

Flat flame
Developed by Osaka Gas and manufactured by us
Name
Flat flame burner  
Model FF
Flame type Flat flame
Product code FF-20K FF-40K FF-60K FF-130K
Features Since the flame spreads thinly around, proximity heating can be performed and the equipment can become compact. The turn-down ratio is high.
There is no specified direction in which the burner should be mounted. Since even excess air burns, the burner can be used in both high-temperature and low-temperature ranges.
Use Hardening and tempering of steel, heating of steel for casting Annealing of steel or aluminum alloy, dissolution of low-melting-point metal
Combustion amount
24kW~144kW

Name
Metallic flat flame burner  
Model FFM
Flame type Flat flame
Product code FFM-20K FFM-40K FFM-60K FFM-130K
Features Since it is metallic, it is lightweight, robust, and compact. Since the flame spreads thinly around, proximity heating can be performed and the equipment can be compact.
The turn-down ratio is high. There is no specified direction in which the burner should be mounted. Since even excess air burns, the burner can be used in both high-temperature and low-temperature ranges.
Use Hardening and tempering of steel, heating of steel for casting Annealing of steel or aluminum alloy, dissolution of low-melting-point metal
Combustion amount
24kW~144kW

Name
CS burner  
Model CS
Flame type Flat flame
Product code CS-100K CS-200K CS-400K
Features It is a flat flame burner with a long tile. It can be easily attached to a high-temperature furnace with a thick furnace wall. The turn-down ratio is high. (6:1 or more) The burner is compact. Preheated air up to 300°C can be used.
Use Metal heat treatment furnaces, non-ferrous metal melting furnaces, casting furnaces, independent glass furnaces
Combustion amount
104Kw~415Kw
 

Indirect heating
Developed by Osaka Gas and manufactured by us
Name
radiant tube burner Catalog
Model RTN
Flame type Straight flame indirect radiant type
Product code RTN-80A-S RTN-100A-S RTN-125A-S
RTN-80A-L RTN-100A-L RTN-125A-L
Features No vibration or noise is produced regardless of the inner diameter and shape of the radiant tube and whether or not heat exchange is performed. Thus, excellent combustion can be achieved. There are short flame specifications and long flame specifications, and they can be used for various purposes. It can be used with direct ignition and ON/OFF control of the time proportion, and can be adjusted easily.
Use Heat treatment furnaces, drying furnaces
Combustion amount
42kW~84kW
 

Burner developed by Osaka Gas and manufactured by usCreative Techno Solution Co., Ltd.
Sales: Creative Techno Solution Co., Ltd.
Manufacturing and sales: Narita Seisakusho Co., Ltd.
Go back to the product introduction page.